Features
- Minute Ventilation (MV) algorithm is used to calculate tidal volume and respiratory rate over 13 points in each breath cycle, with rapid adaptation of treatment delivered in response to changing ventilation needs by automatically adjusting pressure support to break the cycle of hyperventilation and central events.
- Easy-Breathe waveform recreates the natural inspiratory and expiratory cycles of your breathing, to deliver a smoother and more comfortable treatment experience.
- Climate Control humidification delivers constant, comfortable temperature and moisture levels with the goal of increasing treatment compliance by minimizing common side effects of therapy.
- Auto-adjusts EPAP pressure for obstructed airway events in the ASV Auto mode by responding to changes in upper airway stability throughout the night.
- VSync constantly monitors the airflow so that if an unintentional mask leak occurs, the device can quickly compensate for the leak and maintain breathing synchrony.
- Supplemental oxygen compatible with up to 15 L/min of supplemental oxygen in CPAP and ASV modes and up to 4 L/min in ASV Auto mode.
- Data Connectivity with AirView™, the cloud-based patient management system, and that offers your sleep clinician access to nightly therapy data and the ability to remotely manage and troubleshoot.
This product Includes:
- AirCurve 10 VPAP Auto Machine
- Integrated HumidAir Heated Humidifier
- Standard Humidifier Chamber
- Heated Tubing
- Power Supply and Cord
- Travel Bag
- 1- Standard Filter (Installed)
- Product Manual
**Mask NOT included with this device.
Specifications
PRODUCT DIMENSIONS
Physical – device and water tub
Dimensions (H x W x D): 4.57″ x 10.04″ x 5.91″
PRODUCT WEIGHTS
Weight (device and standard water tub): 44 oz (1248 g)
Weight (device and cleanable water tub): 44 oz (1248 g)
POWER
90W power supply unit
AC input range: 100–240V, 50–60Hz 1.0–1.5A, Class II
115V, 400Hz 1.5A, Class II (nominal for aircraft use)
DC output: 24V 3.75A
Typical power consumption: 53W (57VA)
Peak power consumption: 104W (108VA)
TECHNICAL
ASV, ASVAuto: 4 to 25 cm H2O (4 to 25 hPa)
CPAP 4 to 20 cm H2O (4 to 20 hPa)
Pressure sensor at air outlet:
Mask pressure 4–25 cm H2O (4–25 hPa) 0.1 cm H2O (0.1 hPa)
Flow derived values:
Leak 0–120 L/min 1 L/min
Tidal volume 0–4000 mL 1 mL
Respiratory rate 0–50 BPM 1 BPM
Minute ventilation 0–30 L/min 0.1 L/min
ENVIRONMENTAL
Operating temperature: +41°F to +95°F (+5°C to +35°C)
Note: The air flow for breathing produced by this therapy
device can be higher than the temperature of the room.
Under extreme ambient temperature conditions
(104°F/40°C) the device remains safe.
Operating humidity: 10 to 95% relative humidity, non-condensing
Operating altitude: Sea level to 8,500′ (2,591 m); air pressure range 1013 hPa to
738 hPa
Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity: 5 to 95% relative humidity, non-condensing
HUMIDIFIER
Water capacity: To maximum fill line 380 mL
Standard water tub – material: Injection molded plastic, stainless steel and silicone seal
Cleanable water tub – material: Injection molded plastic, stainless steel and silicone seal
Temperature
Maximum heater plate: 154°F (68°C)
DESIGN LIFE
Device, power supply unit: 5 years
Cleanable water tub: 2.5 years
Standard water tub, air tubing: 6 months
MANUFACTURER INFORMATION
Warranty: 2 years
